88 90q slave cylinder

[Ed Kellock]

Shouldn't have to remove the tranny, but it won't be easy.  If it's
anything like my CGT or urq, then it's right at the top of the
transmission bell housing.  There's a split pin that holds the slave
cylinder in place.  The slave is longitudinal or inline with the
engine/tranny and the split pin is transverse. If you follow the hose from
the master, you'll find the slave.

Ed

-----Original Message-----
From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com]
On Behalf Of Steve Meyer
Sent: Tuesday, May 19, 2009 2:31 PM
To: quattro at audifans.com
Subject: 88 90q slave cylinder



Well...we got the clutch master cylinder installed and then it blew the
slave cylinder. Do I need to remove the tranny to get to it or is there
something I missed. I only looked at it quickly so I need all of your
input before we dig back in.

Thanks,
slm



_______________________________________________
quattro mailing list http://www.audifans.com/mailman/listinfo/quattro
http://www.audifans.com/kb/List_information
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.238 / Virus Database: 270.12.33/2120 - Release Date: 05/19/09
06:21:00