Oil pressure warning at 2800 rpm, 1988 90Q
Tihol Tiholov
t.tiholov at gmail.com
Thu Oct 8 12:43:16 PDT 2009
> ... It gives me a loud beep and a
> flashing oil pressure symbol every time I exceed 2800 rpm or so. The light
> stays on as long as I keep it above 2800, disappears only if the engine
> slows down.
>
BTDT
> My understanding is that there is a low and a high pressure sensor on the
> car, but looking at the engine block I only see one, brown.
There are 2, one above the other, both screwed in the block.
> Is the pressure sender (the big barrel) acting as the high pressure
> sensor? It's disconnected right now, actually the terminals broke off due
> to rust, awaits fixing.
>
IIRC, the 2-wire is the high pressure, the single wire is for low pressure.
Huw can correct me
>
> I would greatly appreciate some sort of reassurance that it's the
> sensor, rather than actual low oil pressure!
>
It was in my case. It is important to get a new one with the exact same
part number and rating - there are 2 pressure ratings listed on the
regulator. Otherwise the light keeps on coming with new regulator.
Several kinds were used as seen, for instance, at <autohausaz dot com>
More information about the quattro
mailing list