Help! '89 200 10v, where's the front lamp control unit?

[Huw Powell]

> Position #6, despite the book's insistence on #5.  And it wasn't the 
> problem.  Toasty tubular connector in the plug at the switch, and the 
> plastic plug housing was crispy, as well.  Pulled one out of the 90 20v 
> donor car, which also shows signs of heat, and replaced both the end of 
> the wire and the black portion of the housing.  In case the word hasn't 
> gotten out, my old 90 20v bit the dust at the hands of the new owner, 
> and parts are available.  Onward .................!

This is why we relay our headlights - Audi runs the full current through 
the switch, then on to the fuses, then the lights.

-- 
Huw Powell

http://www.humanspeakers.com/audi

http://www.humanthoughts.org/