window won't go up

[Huw Powell]

I think all that metal is the "inner door panel" and can be removed from 
the door.  Mark exact locations before undoing bolts.  If it's like my 
90, the window comes off with it, as I recall.

Kent McLean wrote:
> The port-side rear window on my '90 V8 won't go up. I pressed the down
> button, it went down OK. But hitting the up button -- no go.  So I did
> a write-up on it, based on my original write-up for my '89 10V 200
> (BTDT). It basically tells you how to put power to the motor, bypassing
> all the switches and switch wiring.
> 
> <http://www.audifans.com/kb/Window_won%27t_go_up>
> 
> In a moment of prophecy, I noted "If the window still does not move,
> you have a problem with the motor or regulator."  So of course mine
> still won't go up. I thought it would be an easy matter to remove
> the panel and take out the motor, but *no-oo-oo*, the V8 door is
> built like a tank. There is sheet metal covering the entire inside,
> with a few holes barely big enough to get a hand in.
> 
> The manual says:
> * remove door trim panel
> * remove inner door panel
> * remove regulator mounting bolts, and remove
>    regulator from inner door panel
> 
> They're kidding, right? Anyone have a better "how-to"?
> 
> Thanks.
> 

-- 
Huw Powell

http://www.humanspeakers.com/audi

http://www.humanthoughts.org/