window won't go up

[hayes myers]

Yeah...the 'metal part is the door insert.. Very easy to remove this!
....it's not as bad as you describe it Kent... especially since i pulled
mine off (and all the clips!).  Hardest thing i found was the phillips
behind the door handle (old 5k) that i forgot about.

marking locatins as Huw states will be a good idear as well..so everything
lines up perfecto when you put it back.

On Thu, Jan 21, 2010 at 4:23 PM, Huw Powell <audi at humanspeakers.com> wrote:

>
>
> hayes myers wrote:
>
>> Ooops. Nope... you have to strip the door down. Doesn't take too long. I
>> broke all the black plastic clips that kept my insulation in place (on a
>> parts car i stirpped) Not sure easy way to take them off correctly. (big
>> flat circle one side with a serrated plug ...)
>>
>
> There's a special (generic) tool for popping those out without breaking the
> clip or the panel.  It's hard to describe, but picture a screwdriver with
> its shaft bent into about a 150 degree curve and a 1" wide blade with a "V"
> notch in it.
>
>
> --
> Huw Powell
>
> http://www.humanspeakers.com/audi
>
> http://www.humanthoughts.org/
>