Need info on changing the starter '90 80

[Al]

The cover I saw was just under the header, just forward of mid-line. I'll 
try to get back under it this weekend, if my back will let me. If next week. 
I will take a few picture while I am down there.
Thanks Huw,

Al

--------------------------------------------------
From: "Huw Powell" <audi at humanspeakers.com>
Sent: Friday, July 23, 2010 6:31 PM
To: "Al" <bournej at hawaii.rr.com>
Cc: <Quattro at audifans.com>
Subject: Re: Need info on changing the starter '90 80

> On the five cylinder you don't need to remove or undo anything to r'n'r 
> the starter.
>
> Perhaps the "cast aluminum cover" you are seeing is the transmission case?
>
> On 7/23/2010 3:23 AM, Al wrote:
>> I was under my car today replacing the bushing/links on the sway bar. I 
>> was on the pass side and looked for the starter. With my head forward of 
>> the hub assy, I can see the red cable that comes down toward the front 
>> and then reverses itself back to the starter. I can see only a little of 
>> the starter, there is what looks like a cast aluminum cover, in the way. 
>> If I remove this will it give me more room to see/access the starter.
>>
>> The starter is not acting up at this time, but when it does, I need to 
>> know how to access it or the solenoid.
>>
>> I am sure that Huw or Cody have done quite a few.
>>
>> I hope I don't need to remove the exhaust manifold or header pipe.
>>
>> TIA,
>>
>> Al
>> _______________________________________________
>> quattro mailing list
>> http://www.audifans.com/mailman/listinfo/quattro
>> http://www.audifans.com/kb/List_information
>>
>
> -- 
> Huw Powell
>
> http://www.humanspeakers.com/audi
>
> http://www.humanthoughts.org/