Need info on changing the starter '90 80

[Al]

Maybe they saw was a pia it was and chose to ignore it. Hehe
I'll get to it, even if I have to pull the engine.  Right!

--------------------------------------------------
From: "John Lagnese" <jlagnese at massed.net>
Sent: Saturday, July 24, 2010 8:13 PM
To: <audi at humanspeakers.com>; "'Al'" <bournej at hawaii.rr.com>
Cc: <Quattro at audifans.com>
Subject: RE: Need info on changing the starter '90 80

> Typical Bentley!
>
> -----Original Message-----
> From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com] 
> On
> Behalf Of Huw Powell
> Sent: Sunday, July 25, 2010 12:09 AM
> To: Al
> Cc: Quattro at audifans.com
> Subject: Re: Need info on changing the starter '90 80
>
> I looked it up in the Bentley, they apparently consider the job so easy
> as to ignore it.  All they have is a troubleshooting section.
>
> On 7/24/2010 3:26 AM, Al wrote:
>> The cover I saw was just under the header, just forward of mid-line.
>> I'll try to get back under it this weekend, if my back will let me. If
>> next week. I will take a few picture while I am down there.
>> Thanks Huw,
>>
>> Al
>>
>> --------------------------------------------------
>> From: "Huw Powell" <audi at humanspeakers.com>
>> Sent: Friday, July 23, 2010 6:31 PM
>> To: "Al" <bournej at hawaii.rr.com>
>> Cc: <Quattro at audifans.com>
>> Subject: Re: Need info on changing the starter '90 80
>>
>>> On the five cylinder you don't need to remove or undo anything to
>>> r'n'r the starter.
>>>
>>> Perhaps the "cast aluminum cover" you are seeing is the transmission
>>> case?
>>>
>>> On 7/23/2010 3:23 AM, Al wrote:
>>>> I was under my car today replacing the bushing/links on the sway bar.
>>>> I was on the pass side and looked for the starter. With my head
>>>> forward of the hub assy, I can see the red cable that comes down
>>>> toward the front and then reverses itself back to the starter. I can
>>>> see only a little of the starter, there is what looks like a cast
>>>> aluminum cover, in the way. If I remove this will it give me more
>>>> room to see/access the starter.
>>>>
>>>> The starter is not acting up at this time, but when it does, I need
>>>> to know how to access it or the solenoid.
>>>>
>>>> I am sure that Huw or Cody have done quite a few.
>>>>
>>>> I hope I don't need to remove the exhaust manifold or header pipe.
>>>>
>>>> TIA,
>>>>
>>>> Al
>>>> _______________________________________________
>>>> quattro mailing list
>>>> http://www.audifans.com/mailman/listinfo/quattro
>>>> http://www.audifans.com/kb/List_information
>>>>
>>>
>>> --
>>> Huw Powell
>>>
>>> http://www.humanspeakers.com/audi
>>>
>>> http://www.humanthoughts.org/
>>
>>
>
> -- 
> Huw Powell
>
> http://www.humanspeakers.com/audi
>
> http://www.humanthoughts.org/
> _______________________________________________
> quattro mailing list
> http://www.audifans.com/mailman/listinfo/quattro
> http://www.audifans.com/kb/List_information
>
>
>
> ---------------------------------------------------------------------------------------------------
> Text inserted by Panda IS 2010:
>
> This message has NOT been classified as spam. If it is unsolicited mail 
> (spam), click on the following link to reclassify it: 
> http://localhost:6083/Panda?ID=pav_3630&SPAM=true&path=C:\Windows\system32\config\systemprofile\AppData\Local\Panda%20Security\Panda%20Internet%20Security%202010\AntiSpam
> ---------------------------------------------------------------------------------------------------
>