89 200 headlight bulb warning

[Ed Kellock]

Here's a post I saved...

-----Original Message-----
From: v8-bounces at audifans.com [mailto:v8-bounces at audifans.com] On Behalf Of
RockinV8Q at aol.com
Sent: Sunday, September 10, 2006 9:23 PM
To: v8 at audifans.com
Subject: [V8] Defeat the headlight warning...100/200/V8


Remove the headlamp bulb monitor ( aka warning relay) and bend pin  "K" 90 
degrees so when you reinsert it into its socket pin K no longer makes any  
contact. This prevents the ground signal from being sent to the Cluster.  :)
 
 100/200 has the monitor in the relay rack behind the drivers knee  pad, V8 
has it located in the pass floorboard relay rack. It looks like a  big
double 
relay and each pin is clearly labeled on the bottom of the  monitor.

Ed
 


-----Original Message-----
From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com] On
Behalf Of john at westcoastgarage.net
Sent: Tuesday, November 16, 2010 3:22 PM
To: quattrolist
Subject: 89 200 headlight bulb warning


This car has been relayed, and the bulb failure warning light is lit.  
Which pin on the relay do I bend out of the way?

Thanks, John
_______________________________________________
quattro mailing list http://www.audifans.com/mailman/listinfo/quattro
http://www.audifans.com/kb/List_information
No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 9.0.869 / Virus Database: 271.1.1/3260 - Release Date: 11/16/10
00:34:00