quattro Digest, Vol 85, Issue 43

[Robert Cuttler]

> From: "Bill Green" <wgreen56 at tampabay.rr.com>
> Subject: RE: heater problem
 
> 
> Are you sure the valve the cable is attached to is functioning properly?
> Could be its not opening fully. 
> 
> Bill
 
> The temperature gauge reads right in the center normal as it always had for
> years.  One of the first things checked was whether the electric controls
> were working properly and moving the "gates" that control air flow over the
> heater core.  That system is working OK.
               ====================================
I'm told by the shop that everything mechanical is working appropriately.


Bob
rcuttler at optonline.net