brake bleeding ... 87 5KTQ

[Tony Hoffman]

Yes, but that's the "normal" situation for any brake components. It
only sucks ait till the griavity or pressure pulls the fluid back out.
When the master cylinder isn't pressed, there is a clear path from the
reservoir to each brake caliper, if that prop valve isn't shutting
things off.

Tony

On Mon, Nov 22, 2010 at 8:34 AM, L DC <ldc007usa at yahoo.com> wrote:
> Peter,
>
> "I recall that you have to "block" the prop valve open to get a proper bleed."
>
> But wouldn't that cause it to bleed (when brake pedal is pushed down) followed by sucking air (when pedal returns?
>
> -Regards,
>
> -Louis