re s6 avant

[Mark Rosenkrantz]

I do that, too.  I have a 500W soldering iron, allthough a torch is faster.

Mark

On Thu, Dec 15, 2011 at 2:48 PM, Bares, Vittorio
<Vittorio.Bares at nuance.com>wrote:

>  “i also like to flow solder into the connection once crimped”****
>
> ** **
>
> I thought I was the only one that did that ;)****
>
> ** **
>
> I just went out and got 15’ of 2G -  lugs and an new batt terminal.****
>
> ** **
>
> Thanks!****
>
> ** **
>
> Vittorio -****
>
> *From:* thejimrose [mailto:thejimrose at gmail.com]
> *Sent:* Thursday, December 15, 2011 12:26 PM
> *To:* quattro at audifans.com; Mark Rosenkrantz; Bares, Vittorio
> *Subject:* re s6 avant****
>
> ** **
>
> either a splice or a replace will fix it - splice is quick and dirty, full
> replace is ideal. any decent car audio shop could whip you up a nice 4awg
> run in whatever length you need and whatever connectors on either side. if
> you dont have a sufficient crimper. ****
>
> ** **
>
> i also like to flow solder into the connection once crimped. heatshrink
> and some braided jacketing and you're in bizness. ****
>
> ** **
>