[WT-Audifans] RE: Starter Motor Installation

[Frank M.]

+1 on that rope like fabric from a speed shop.


> From: jungle at hickorytech.net
> To: spokes at the-wire.com; w-t_audifans at yahoogroups.com
> Date: Wed, 16 Feb 2011 11:19:16 -0600
> Subject: Re: [WT-Audifans] RE: Starter Motor Installation
> CC: audi_owners_usa at yahoogroups.com; quattro at audifans.com
> 
> On can buy that faberic seprately from most any speed shop and cut/wrap
> it yourself.
> 
>   ----- Original Message -----
>   From: "Dave Hord--"
>   To: "WT-Audifans"
>   Cc: audi_owners_usa at yahoogroups.com, quattro at audifans.com
>   Subject: Re: [WT-Audifans] RE: Starter Motor Installation
>   Date: Wed, 16 Feb 2011 16:52:00 +0000
> 
> 
>   Any performance parts shop (performance improvements, karbelt,
>   etc.) Will have a DEI brand starter wrap. It wraps the whole
>   starter, doing the same job. Relatively cheap if I remember
>   correctly.
> 
>   -Dave
> 
>   Coaching - Photography - Product Development
>   www.davehord.com
>   604 849 0076
> 
>   -----Original Message-----
>   From: "Max Hoepli"
>   Sender: w-t_audifans at yahoogroups.com
>   Date: Wed, 16 Feb 2011 09:39:53
>   To:
>   Reply-To: w-t_audifans at yahoogroups.com
>   Cc: ;
>   Subject: RE: [WT-Audifans] RE: Starter Motor Installation
> 
>   Melt the solenoid?!! Wonder why the mechanic did not transfer wrap?
>   He knows
>   the car has a turbo. Have you know cases of the turbo milting? I'll
>   ask
>   mechanic to hold on to wrap. Just in case he doesn't have wrap, where
>   would
>   I get a wrap?
> 
> 
> 
>   Max
> 
>   _____
> 
>   From: w-t_audifans at yahoogroups.com
>   [mailto:w-t_audifans at yahoogroups.com] On
>   Behalf Of fdekat
>   Sent: Monday, February 14, 2011 16:40
>   To: w-t_audifans at yahoogroups.com
>   Subject: RE: [WT-Audifans] RE: Starter Motor Installation
> 
> 
> 
> 
> 
>   Max:
>   I hope you moved the silver to the new starter. It's a heat shield to
>   prevent
>   teh turbo from melting the solenoid. THe heat shield isn't supplied
>   with teh
>   starter, as on NA motors, it's not required.
> 
>   --- "Max Hoepli" > wrote:
>   > I noticed that the old solenoid has a silver-like wrap-around tied
>   to the
>   > > solenoid by a cable tie.
>   > > > The new solenoid did not have a silver tie-around.
>   > > > Max
> 
> 
> 
> 
> 
>   [Non-text portions of this message have been removed]
> 
> 
>   _______________________________________________
>   quattro mailing list
>   http://www.audifans.com/mailman/listinfo/quattro
>   http://www.audifans.com/kb/List_information
> 
> 
> 
> 
> ..Aaron "youngblood" Jongbloedt
> 
> -Nexus Information Systems Engineer
> --Carpe Diem
> http://junglemotorsports.blogspot.com
> Tis better to wear out than it is to rust out.
> _______________________________________________
> quattro mailing list
> http://www.audifans.com/mailman/listinfo/quattro
> http://www.audifans.com/kb/List_information