rear wheel hub

[Marco Weibel]

Don' forget to inspect the surface where the seal will ride on
Varying manufacturers have the sealing lips at a different position and/or it can be pressed in more/less. 
Use very fine grit sandpaper and carefully remove the brake-dust and corrosion that may have accumulated a 1/4 of an inch further back where the old one was riding and apply some grease between the lips of the seal before you slide everything back together.

 Cheers :)



Sent from my iPhone

On 2013-03-01, at 4:06 PM, Danny <pyro_10314 at yahoo.com> wrote:

> Tires still have some life on them.  The noise grew gradually to almost being unbearable now. With the car jacked up, the tire has some play to it. Being the internet doctor that I am, I found a video on youtube describing this as also being a bad bearing.  
> 
> _______________________________________________
> quattro mailing list
> http://www.audifans.com/mailman/listinfo/quattro
> http://www.audifans.com/kb/List_information