87 5kCS tranny stuck, won't come out

[Huw Powell]

Oh that's right, the bolts I was referring to are just oil pan bolts. 
Never mind...

On 8/6/2014 7:49 PM, Cody Forbes wrote:
> I'm pretty sure the bracket does not have any bolts behind the flywheel. This should be a MC engine which only has 4 bolts holding the bracket to the block. All for are 13mm heads that bolt upward to the block outboard of the oil pan. The bracket then has two bolts going through it to the bell housing, drivers side is a bolt and nut and passenger side is just a bolt with the head facing on the engine side.
>
> -Cody Forbes (mobile)
>
> On Aug 6, 2014, at 6:17 PM, Huw Powell <audi at humanspeakers.com> wrote:
>
>>
>>
>> On 8/6/2014 6:03 PM, patrick gillen wrote:
>>> Also have received advice on removing the lower bell
>>> housing bracket attached to the engine oil pan
>>
>> Yeah, that thing is bolted to the block and the tranny, good call whoever mentioned it..
>>
>> You have to line up the slots in the flywheel to get to a couple of the block/oil pan bolts, btw.
>> _______________________________________________
>> quattro mailing list
>> http://www.audifans.com/mailman/listinfo/quattro
>> http://www.audifans.com/kb/List_information
>