[V8] ignition lock

Eric Huppert ehuppert at hvc.rr.com
Fri Mar 10 05:28:28 PST 2017


Ed,

 

Just went through lock install on my sons 200. Have done this job before on
my own vehicles, turned out to be a pita. If the V8 is the same as the 200
you have to unbolt steering column as not enough clearance to remove
assembly. 

 

While looking for my own directions/write-up I came across another method on
audifans!

 

Remove wood trim (goes across dash) and grind tumbler with a small dremel
and remove. Was then able to insert a modified feeler gauge to depress
spring tab, then remove tumbler. Took a bit, but much easier than removing
column!

 

Can't confirm part #'s, but think I bought on ebay for $12,

 

Eric



More information about the quattro mailing list