[V8] ignition lock

[Eric Huppert]

Sent this last week, but never showed up? Not subscribed to the V8 list, so
cross posting here!

 

Ed,

 

Just went through lock install on my sons 200. Have done this job before on
my own vehicles, turned out to be a pita. If the V8 is the same as the 200
you have to unbolt steering column as not enough clearance to remove
assembly. 

 

While looking for my own directions/write-up I came across another method on
audifans!

 

Remove wood trim (goes across dash) and grind tumbler cover (black) with a
small dremel and remove. Was then able to insert a modified feeler gauge to
depress spring tab, then remove tumbler. Took a bit, but much easier than
removing column!

 

Can't confirm part #'s, but think I bought on ebay for $12,

 

Eric