[s-cars] Anybody had this happen?

[Robert Pastore]

<snip>
..."that causes an abrupt shear in acceleration." <snip>

>>>>>>>>>>>>>>>>>Really need more details to give good advise, but this can
be as simple as a hose blown off at the moisture trap under the black cover
at the rear of the engine.

<snip>
I have replaced..........and both speed sensor/position sensor.  The car
also has an intermittent
stalling which does give a speed sensor/position code? <snip>

>>>>>>>>>>>>>>>>> The stalling might not be related to the code. AFAIK, you
will get this code if you run Vag-com if the engine is not running.   If
either sensor were to fail, the engine won't restart.  If either failed
while the engine was running, the ECU would substitute a default value and
keep running, but this would not cause the engine to stall.

Bob



_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list