[s-cars] Stumbling at low rpm

[Rob Pecsar]

Is your feeling the same for brake sensor cables?  I'm converting over to 993
brakes which have the porsche sensor. Any recommended connector/connector type?

Rob Pecsar
92 MTM 1+

QSHIPQ at aol.com wrote:

> --
> [ Picked text/plain from multipart/alternative ]
> I agree Peter.  I used to be mister solder, no more.  A good crimp with a
> good crimper on a good connector, needs no welding compromise added.  Audi
> uses good connectors, and already issued a couple TSB/A's on the subject = no
> solder.
>
> SJ
> In a message dated 12/23/02 8:44:47 AM Central Standard Time,
> peschulz at cisco.com writes:
>
> Vincent:
>
> The flux will eventually migrate towards the O2 sensor, contaminating it, or
> the environment will activate the flux and lead to corrosion of the splice.
>
> BTW, I disagree with the practice of solder splicing wires, especially in an
> underhood environment
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list