[s-cars] Fwd: RS2 brackets

[Igor Kessel]

Um...eeehh... and most importantly its orientation on the trailing edge
in a Porsche vs. the leading edge in an UrS, thus there is a need to
reverse the hard line connecting the halves should you decide to use the
black 928gts calipers in our cars.

Igor

TM wrote:
>
> Note- 928GTS and 993tt calipers are identical save for the part number
> and the color (Black
> as opposed to Red).
>
> Taka
>
> -----Original Message-----
> From: s-car-list-admin at audifans.com
> [mailto:s-car-list-admin at audifans.com] On Behalf Of Igor Kessel
> Sent: Monday, July 29, 2002 2:54 PM
> To: Paul Friedenberg
> Cc: audisport8 at aol.com; s-car-list at audifans.com
> Subject: Re: [s-cars] Fwd: RS2 brackets
>
> They do in my car. I know nothing about the 314mm rotors.
> The 323mm rotor clears the 993tt (or, in my case, the black 928gts)
> calipers RADIALLY just fine. In order to centre the rotor AXIALLY in the
> caliper pads' slot I had shaved 50 mils off the RS2 brackets per Frank's
> old recommendation. Although they would've fit w/o this procedure, but a
> perfectionist inside me took over.
>
> Igor
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list