[s-cars] Oxygen Sensor Electrical Connector - Won't Budge

[Jacobson, Steven F (Steve)]

If this is the connector that is held in the metal holder, try the following. First, disconnect the top half of the connector so you have the bottom part left in the metal holder. Then, twist/turn (and shout :-) ) the bottom part a bit and pull forward on it (toward the front of the car) and it should free up and slide out the slot at the front of the metal holder.

HTH

Steve
'93 S4
'92 100 CS
-----Original Message-----
From: JTom8869 at aol.com [mailto:JTom8869 at aol.com]
Sent: Friday, May 03, 2002 10:08 AM
To: s-car-list at audifans.com
Subject: [s-cars] Oxygen Sensor Electrical Connector - Won't Budge


--
[ Picked text/plain from multipart/alternative ]
Replacing O2 sensor today and having trouble removing the electrical
connector against the firewall that has the 2 white wires. Any tips on
freeing this sucker?
Looks like this may be first time this sensor has been replaced.
Thanks is advance.
Weak fingers Tomlinson.
93 S4

_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list