[s-cars] RS2 EM / Turbo BTDT (longish)

[Robert Pastore]

Bill:

Nice writeup!

A little BTDT Re: the oil line screw.
You said:
<SNIP>"During removal, all went well till I hit the 5mm allen oil line screw
on
the underside of the turbo.  My allen wrench curved portion, going into
the screw, was too long I think and it took some time to properly center
it in the screw to get it out.  But considering I had to hang by my feet
from the ceiling for this manuever, the difficulty was to be expected."
<snip>

I found (probably the third time I did this job after fighting with these
bolts the first two times) that both removal and install are MUCH MUCH
easier if you leave the lower oil line connected to the turbo, and instead
remove the line where it connects to the block.

--Bob





_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list