[s-cars] heated seat control bulbs - 93 S4

[Rich Assarabowski]

I did mine recently, just pry the plastic cover off and slide out the
assembly (as described in
http://www.urs4.com/technical/interior/interior_trim.html#seat%20heater)
.  I couldn't get the bulb out with either the super glue or tweezers
technique, instead I used a nail punch to break the bulb and pulled out
the leads from the recess.  There's no need to disassemble the unit
other than to slide the housing off.  I used a red-colored bulb from a
model shop, you may want to try an LED for longer life but be sure it
gives good lighting off the sides of the bulb, as described in urs4.com.

<Has anyone had the opportunity to pry out the circuit board from the
plastic housing of the seat heater control unit on a <ur S4 or S6?