[s-cars] FW: Clutch Problems

[Igor Kessel]

Dan Slagle wrote:
>
> This is a multi-part message in MIME format.
> --
> [ Picked text/plain from multipart/alternative ]
> Gentlemen:    I need help in diagnosing a problem with my 1995 S6.  This
> morning when shifting, the clutch pedal went to the floor and did not
> return.  It will either stay on the floor, or I can pull it up and it
> will stay in that position.  When I manually push it down, it travels to
> the floor with some degree of force, and the same when I pull it back
> up.  Prior to today, it was working fine.   Is there a return spring
> that may have broken or come-off, and if so, where is it located?  I
> really appreciate any guidance you are willing to provide me.  Thank
> you.
>
> Dan
> 95 S6

Yes there is, the so-calle "over-centre spring", but my gut tells me
that your clutch MC is done. If you have air in the MC you'll get
exactly the same pedal behaviour, although the over-centre spring will
be still intact.
Once there, do yourself a favour and replace all three components: the
MC, the slave and the rubber pressure hose. For bleeding you'll need a
pressure bleeder. The clutch sys is impossible to bleed via conventional
means.

Gentlemen, I hope you don't forget to bleed your clutches at least once
a year, when you bleed brakes. See what happens...

--
Igor Kessel
two turbo quattros