[s-cars] Driveshaft replace/rebuild? sources?

Martin, Gary G MartinGG at aetna.com
Wed Apr 23 23:07:09 EDT 2003


Yeah, the mounts didn't look any different to me either. I thought, oh
crap!, this won't make a difference. But the slight vibration left after
the drive shaft regrease, was gone.

Gary

-----Original Message-----
From: Rich Assarabowski [mailto:konecc at snet.net]
Sent: Wednesday, April 23, 2003 9:46 PM
To: 'DOUGLAS LANDAETA'; Martin, Gary G
Cc: 'AUDI S Cars Discussion List'
Subject: RE: RE: [s-cars] Driveshaft replace/rebuild? sources?


I just replaced the tranny mounts on my '93 S4 (93K miles) while doing
the suspension.  They didn't look much different than the new ones I put
in (certainly not by eye), but it eliminated all of the motion in the
gearshift lever when on/off throttle.  Didn't have any vibration before
or after doing these, so can't speak to that.

-- Rich A.

>If my mechanic/automotive techician can show the mounts are worn out of
OEM tolerances, they could be a waaranty
>item.  Hmmmmm  a pair of calipes might prove this...

>> Oh, and another thing. Worn transmission mounts can cause this.
>> Saggingmounts cause CV to run a little out of it's normal wear area.
>> Thanks to Tom Saltino a long time ago for this tip. Mounts are easy
to
>> replace. BTDT...vibration gone.



This e-mail may contain confidential or privileged information.  If you
think you have received this e-mail in error, please advise the sender by
reply e-mail and then delete this e-mail immediately.  Thank you.  Aetna



More information about the S-car-list mailing list