[s-cars] Re: Grrrrrrrrrrr.... prop-shaft problem?

[Bjørn Ødegård]

I'm trying to gather info on all the tools for the UrS, and I will try
to reconstuct them in Autocad and put them on my upcoming webpage with
the Acrobat files later..

Wouldn't it be nice to be able to make your own tools without having to
grind and test for several hours or try to make out how it's built?

Bjorn  :o)
'92 S4

----- Original Message -----
From: "Paul Heneghan" <paul at heneghan.co.uk>
To: "S-Car-List" <s-car-list at audifans.com>
Cc: "Adrian Hart" <mail at red-wing.co.uk>
Sent: Friday, August 29, 2003 12:19 AM
Subject: [s-cars] Re: Grrrrrrrrrrr.... prop-shaft problem?


> Hello Adrian,
>
> I can't offer any help, but I do have a question.  What tool did you
> purchase - was it the long straight-edge that allows you to
check/adjust the
> positioning of the central bearing carrier?  I'm trying to work out
what
> specialist tools I'll need to maintain my S6.  So far, all I've got is
the
> Bentley on CD-ROM, the VAG-COM computer diagnostic tool and the 2084
> crank-locking tool I used on my old 80q and 100 Avant - the 2084 is
not
> actually the correct tool for AAN engines, but one lister assured me
he used
> it with no problems.
>
> Paul
> 1995 S6 Avant (UK model)
>
> >From: Adrian Hart <mail at red-wing.co.uk>
>
> >Grrrrr is the noise my S4 is still making, together with a low
frequency
> >vibration, on high-power/low rev take-off and hard acceleration from
a low
> >RPM condition. Having had the clutch replaced I was led to believe
that
> >growling symptoms were caused by misaligned propshaft and accordingly
> >purchased the tool and set everything up by the book. Whilst this did
> >alleviate things a bit, the noise is still there and if anything is
getting
> >worse again.
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>
>



DISCLAIMER:
This message contains information that may be privileged or confidential and is the property of the Roxar Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorised to read, print, retain, copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message.