[s-cars] O2 Sensor

[Jerry Scott]

Robert
Thanks to all  for your prompt replies. I bought some Radio Shack 
disconnectable insulated line connectors.  I assume that it is ok to 
crimp these in place so that the next removal will be easier, rather 
than soldering the wires permanently.
Jerry

Robert Myers wrote:

>
> Yes.  The white wires are for the heating element and it makes no 
> difference which is hooked to which other white wire of the car's 
> harness.  The black wire is the signal wire and must be connected to 
> the black wire of the harness.  No problems at all.  I just did the 
> job the second time about a week and a half ago.
>
> At 07:05 PM 12/23/2003 -0700, you wrote:
>
>> I just bought the Bosch 13913 O2 Sensor at Pepboys for $45, which 
>> requires rewiring since the connector supplied does not fit the Audi 
>> connector. The sensor has two white wires and one black. I am 
>> assuming that when wiring into the existing wiring harness that the 
>> two white wires are interchangeable, otherwise they both would not be 
>> the same color.  Did anyone have a problem with this when hooking it up?
>> Jerry
>>
>>
>> _______________________________________________
>> S-CAR-List mailing list
>> S-CAR-List at audifans.com
>> http://www.audifans.com/mailman/listinfo/s-car-list
>>
>>
>>
>>
>> ---
>> Incoming mail is virus free.
>> Checked by AVG anti-virus system (http://www.grisoft.com 
>> <http://www.grisoft.com/>).
>> Version: 6.0.554 / Virus Database: 346 - Release Date: 12/20/2003
>
> _____
>
> Saddam bin Caught - Osama bin Forgotten
>
> Bob
> *****
>  Robert L. Myers  304-574-2372   
>  Rt. 4, Box 57, Fayetteville, WV 25840 USA  WV tag Q SHIP        
>  '95 urS6 Cashmere Grey - der Wunderwagen   ICQ 22170244         
>  http://www.cob-net.org/church/pvcob.htm
> *****
>