[s-cars] Clear bras

[Tom Green]

On Saturday, February 15, 2003, at 10:09 AM, mlp qwest wrote:

> ~Bob,
> ~
> ~It is slipped on with a soap solution and bubbles and moisture removed
> ~with a squeegee.
> ~
> ~Tom '95 S6
> ~
> Tom
>
> FWIW, the application solution I've seen used is made up of alcohol &
> water.
> I believe this allows the use of a bonding agent that can be dissolved
> at a
> latter time to remove the film if one wants to.
>
> HTH
>
> mlp

Mike,
      Invinca-shield recommends using the 25% alcohol solution only for
troublesome spots, such as corners that won't stay down.  Otherwise, it
tends to make the film difficult to remove.  It bonds well with the
soap solution they send (bought a MB kit also in a 2 for l sale).  BTW,
the life span is warranted for 5 yrs.

      I neglected to disclaim any connection to this company in the
original post.  Unfortunately, I don't have much connection with Hef's
world or clear bras, either.

      This was not the post I was expecting from you.  I already had an
answer composed that Frank had beaten you to the punch:-)   For those
bras, olive oil (virgin or second pressing) works best.

Tom