[s-cars] Temp Readout

[Varon H. Fugman]

Yes, but it needs to be soldered in place.  A replacement 12V pea bulb from
Radio Shack will work.  I used Radio Shack #272-1092C -- 12 volt 60mA Micro
Lamp -- comes in a package of 2.

There are instructions on this page (scroll down to "Replacing the Outside
Temperature Display Bulb"):
http://www.urs4.com/technical/interior/interior_trim.html

BTW, while you have the instrument cluster out is a good time to upgrade the
instrument cluster illumination from 1.1 watt to 2.0 watt bulbs.  You need
10 of the very light green hex base 2.0 watt bulbs, although the light green
square base bulbs will also fit if you bend the connectors before
installation.