DSY in UrS4 vs. UrS6, was RE: [s-cars] Temp & Trans Question

[Keith Maddock]

Taka suggested
"Apparently there is some modification required to the tailpiece of the transmission in order for it to mount to an UrS."

Taka, Do you have more data on that?

For UrS4/S6, it's my understanding tailpeice modifications are only needed if the 6-speed is a  CGR/CRB transmission from a S2 or RS2.

For UrS4 (NOT the UrS6) , the later S4tt transmissions (and most post 95 transmissions), however, I beleive will require centerbox modifications, since they have the 211C center section, which does not have the appropriate bosses to mount the UrS4 Procon10 brackets.  Only the 211B center section has these bosses, and it is not a cheap part.

The other option is to ditch the UrS4 Procon 10 system alltogether.

Elijah, what did you do with your Procon-10 Cables and Bracket??  If I recall, you have a 94 S4, right?

(CC to Rob B. and Charlie and Elijah)

Keith

****************************************************************
Keith Maddock, TRW Automotive,  Koblenz, Germany
Slip Control Systems, Systems Design, Traction Control
+49 (0)261/ 895 2474     -    -    keith.maddock at trw.com