[s-cars] HELP! Crank pulley (vibration dampener)

[Rector, Joel]

Anyone have any ideas?  I'm burning daylight and am no
closer to getting it off.

KR


The timing belt and all belts are off everything except the
crank gear.  The timing belt is slack and hanging by only
this gear.  The crank bolt is out and on the ground.  I
tapped it with the mallet and nothing.  It doesn't budge.

JR


I did this on a 3B motor 3 months ago.

1- The 6 mm hex bolts do NOT need to be removed.

2. Did you remove the hydraulic pump belt and the waterpump
belt?

3. Did you slacken off the timing belt. On mine you do that
by loosening the
water pump.

If you still can't get if off, try tapping the balance
wheel gently with a
rubber mallet.

HTH,

Rich

-----Original Message-----
From: s-car-list-admin at audifans.com
[mailto:s-car-list-admin at audifans.com]On Behalf Of Rector,
Joel
Sent: den 3 juli 2003 22:27
To: S-CAR-List at audifans.com
Subject: [s-cars] HELP! Crank pulley (vibration dampener)


I'm doing the timing belt and I cannot get this thing off.
 I've removed the crank bolt, but the pulley does not
budge.  I tried removing the 6 MM hex screws inside the
pulley but that didn't help.  Am I missing something?  Any
ideas?

JR
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.495 / Virus Database: 294 - Release Date:
2003-06-30

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.495 / Virus Database: 294 - Release Date:
2003-06-30

_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list