[s-cars] front left "bad" noise developed.

[brian bilotti]

Ok,
Here's my past and recent experience with this
"noise".
I only got this "popping" at the track so it was hard
to pin down. Then, I've been having other "issues"
with Edwin, mainly oil seepage from the turbo area.
Consequently this seepage destroyed my passenger side
motor mount and pass side subframe mount. Ok, fast
forward, new motor mount, new subframe mount, hmmmmm,
same noise, shit. Back onto the lift, darned if it
wasn't the inner control arm bushing. The whole
control arm could be moved up and down contacting the
frame member. As long as I hit bumps or unweight the
right front I get the dredded thunking noise. Neadless
to say a new contol arm is going in on Monday.
Oh, BTW, here's a question for y'all, anybody know of
just a replacement bushing for this strut instead of
the whole thing? Here's the why of that question, the
new arm shows up with a separate bushing that needed
to be pressed in. Hello, can I find the separate
bushing or no?

later
Brian Bilotti
'93 S4 "Edwin"
--- matt ludwig <matt.ludwig2 at verizon.net> wrote:
> i have one for all of you,
>
> w/ wheels pointed straight ahead at a standstill and
> breaks not
> applied, i turn the steering wheel to the right 1/2
> a turn, pause, then
> turn back to left and hear a "click" or soft "pop"
> sound from the front
> left wheel assembly.  does not happen when the
> inverse is tried.  any
> thoughts?  tie-rod position (i.e. level to ground)?
> upper shock mount
> cracked?  lower control arm bushings?  steering rack
> mount?  i have
> inspected all these w/ car on ground and does not
> appear to be any
> visible failures of them.
>
> other notes:
>
> 1. have developed a somewhat harsh "clunk" at same
> front left wheel
> assembly when driving over rough spots.  the DC
> roads do not help this
> any, but on compression, there is a stiff, "thunk".
> i cannot tell if
> it does it on a fast, larger rebound as well due to
> road noise.   i
> state this last as i thought maybe the above
> described test would
> eliminate some possibilities.
>
> 2. am riding on h&r/bilstein sport setup w/ stock
> avus 16" rims.
>
> as allllllllllllllllways, all comments are highly
> appreciated.
>
>
> sincerely,
>
> matt ludwig.
> 1995.5 s6 avant.
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list


__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com