[s-cars] DZUS Fastener Availability

[James Murray (LMC)]

Not sure what you mean by the front? The front to me is the part wedges into the slots (it has the big tabs), the back has at least 6 slots on the edge (if I remember correctly), I just thread them through and tighten the Zip-ties. I don't trust the DZUS fasteners.

/J.

-----Original Message-----
From: Kirby Smith [mailto:kirby.a.smith at verizon.net]
Sent: Sunday, March 02, 2003 8:08 PM
To: James Murray (LMC)
Cc: 'voits at attbi.com'; s-car-list at audifans.com
Subject: Re: [s-cars] DZUS Fastener Availability


How do you get them to work on the two holes near the front of the
cover?

kirby

"James Murray (LMC)" wrote:
>
> Been using Zip-ties and I'm not going back... better security, cheap, fairly easy to install and remove, and if you get the release type you can re-use them.
>
> Cheers, /J.
>
> -----Original Message-----
> From: Voits [mailto:voits at attbi.com]
> Sent: Friday, February 28, 2003 6:33 PM
> To: s-car-list at audifans.com
> Subject: [s-cars] DZUS Fastener Availability
>
> Where can I get replacement (female) DZUS fasteners to attach the underside
> engine cover?
> Steve Voit
> Mercer Island, WA
> 95.5 S6
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list