[s-cars] Lean burning cylinder

[Bobby Richter]

This is a multi-part message in MIME format.
--
[ Picked text/plain from multipart/alternative ]
Hi Guys,
Thanks for the feedback. I have had the compression tested and it is
100% so the problem is not with a valve. The plugs were tightened to the
correct torque. I have sent the injectors away for a full calibration,
clean and test. I have not had any feedback from the company yet about
the injectors but will let you know.
BTW the entire plug (electrodes, ceramic and outer metal area) was white
which seems to point to mixture/
Cheers,
Bobby

==========================
Bobby Richter (Technical Manager)
Light Edge Technology (Pty) Ltd.
Tel: +27 21 510 8270 (x261)
Fax: +27 21 510 0300
http://www.lightedge.co.za <http://www.lightedge.co.za/>
==========================