[s-cars] Lean burning cylinder

[Paul Gailus]

Bobby,

Since you also have a white color on the exposed metal parts
of the plug, this sounds like it could be ash deposits from
oil leaking through the intake valve guide and seal.

Paul

----- Original Message -----
From: Bobby Richter <bobby at lightedge.co.za>
To: Paul Gailus <gailus at mindspring.com>; Paul Gailus <gailus at mindspring.com>
Cc: <s-car-list at audifans.com>
Sent: Wednesday, March 12, 2003 12:22 PM
Subject: Re: [s-cars] Lean burning cylinder


> This is a multi-part message in MIME format.
> --
> [ Picked text/plain from multipart/alternative ]
> Hi Guys,
> Thanks for the feedback. I have had the compression tested and it is
> 100% so the problem is not with a valve. The plugs were tightened to the
> correct torque. I have sent the injectors away for a full calibration,
> clean and test. I have not had any feedback from the company yet about
> the injectors but will let you know.
> BTW the entire plug (electrodes, ceramic and outer metal area) was white
> which seems to point to mixture/
> Cheers,
> Bobby
>
> ==========================
> Bobby Richter (Technical Manager)
> Light Edge Technology (Pty) Ltd.
> Tel: +27 21 510 8270 (x261)
> Fax: +27 21 510 0300
> http://www.lightedge.co.za <http://www.lightedge.co.za/>
> ==========================
>
>
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list