[s-cars] Temp Gauge Not Working
Philip Mische
pmische at comcast.net
Mon Mar 31 12:25:48 EST 2003
Goto eBay! I got a Palm Vx (8mb) for $72, though a Palm V (2mb) would
probably be enough and less $$. Handspring is not supported right now.
I have the damn thing running in my car almost all the time - it is so cool!
Data data data, and you can log it. Mike at Steve at Shadetree were a
delight to work with and have a terrific product. I just wish they could
stretch out beyond OBD and get us boost and fuel mixture...
PJM
----- Original Message -----
From: "mlp qwest" <mlped at qwest.net>
To: "Philip Mische" <pmische at comcast.net>
Sent: Monday, March 31, 2003 10:54 AM
Subject: RE: [s-cars] Temp Gauge Not Working
> Thanks Phil, I found the display data block page in the Bentley shortly
> after I asked the Q. Sounds like the Shadetree Software / Palm may be a
> priority sooner rather than latter. Unfortunately I don't have a Palm (or
I
> guess now it may also be available for/in the ?? Handspring software too.)
>
> Mike
>
> ~-----Original Message-----
> ~From: Philip Mische [mailto:pmische at comcast.net]
> ~Sent: Monday, March 31, 2003 8:27 AM
> ~To: mlped at qwest.net
> ~Subject: Re: [s-cars] Temp Gauge Not Working
> ~
> ~
> ~I get Intake Air Temp in Measuring Block 003 on my ProDiag/Palm Vx.
> ~
> ~PJM
> ~95.5 S6
> ~----- Original Message -----
> ~From: "mlp qwest" <mlped at qwest.net>
> ~To: <Andrew.Jackson at bmo.com>; "Dave Forgie" <forgied at direct.ca>
> ~Cc: <mdbishoff at attbi.com>; "s-cars" <s-car-list at audifans.com>;
> ~<s-car-list-admin at audifans.com>
> ~Sent: Monday, March 31, 2003 9:57 AM
> ~Subject: RE: [s-cars] Temp Gauge Not Working
> ~
> ~
> ~> Hum, well that's one temp gauge. What about air temp?
> ~> I would think intake air temp, taken AFTER the IC,
> ~> has got to be, and if it is not, ought to be one of
> ~> the ECU's primary input parameter, yes?
> ~>
> ~> For all of us that have monkeyed about with Davtron's,
> ~> why weren't we clever enough to figure out how to tap the
> ~> IAT signal (your Bentley Manual, Section J 24-4, aka
> ~> Illustration 24-763, Item #26 Intake Air Temp (IAT)
> ~> sensor, -G42-)?
> ~>
> ~> Without monkeying about with a Davtron, anyone know if the VAG tools
&/or
> ~> any HAVC dash Easter egg tricks can give you access to this sensor?
Any
> ~> ideas how fast the OEM temp sensor responds to changes in temps.
> ~>
> ~> Mike "wondering" in the big C, Colorado
> ~>
> ~>
> ~> ~-----Original Message-----
> ~> ~From: On Behalf Of Andrew.Jackson at bmo.com
> ~> ~
> ~> ~Actually, the ECU receives it's temp signal from here:
> ~> ~
> ~> ~http://www.sjmautotechnik.com/20vcoolt.html
> ~> ~
> ~> ~The MFTS is for the gauge only.
> ~> ~Owners of the S can check what temp the ECU coolant temp sensor sees
by
> ~> ~putting the climate control unit into diag mode and switching to a
> ~certain
> ~> ~channel.
> ~> ~(I don't have an S, so I sorta ignored the recent thread on this
> ~> ~proceedure... Check the archives for details)
> ~> ~
> ~> ~
> ~> ~ALJ
> ~> ~
> ~>
> ~>
> ~> _______________________________________________
> ~> S-CAR-List mailing list
> ~> S-CAR-List at audifans.com
> ~> http://www.audifans.com/mailman/listinfo/s-car-list
> ~
> ~
>
>
More information about the S-car-list
mailing list