[s-cars] 314mmx30 brake calipers S6+ euro setup?
Frederic L'Huillier
Frederic.L'Huillier at Siebel.com
Mon Mar 31 14:54:04 EST 2003
Hi,
How many on the list have Big Red Calipers on the rear wheels ?
Regards,
Frederic
-----Original Message-----
From: Bob Rossato [mailto:bob.rossato at att.net]
Sent: Monday, March 31, 2003 2:06 PM
To: Linus Toy; 'Thompson Smith'; s-car-list at audifans.com
Subject: RE: [s-cars] 314mmx30 brake calipers S6+ euro setup?
Actually, the 314x30 are standard S6 and S6 4.2 (AEC) brakes for
everywhere but North America. The S6+ brakes are 323 x 30. Either kit
will require a different strut than what is presently on the car. Like
others have said, stick with a Big Red/Big Black setup like that on your
S4 (and you can also get Big Silver and Big Yellow). I'm putting
together a kit like Linus mentioned using the RS2 brackets, but with
2-piece rotors to cut down on the rotational mass. You could also go
with the ECS Stage 2 or 3 kits. If you can get in on the latest GP
price it is hard to beat.
Bob
> -----Original Message-----
> From: s-car-list-admin at audifans.com
> [mailto:s-car-list-admin at audifans.com]On Behalf Of Linus Toy
> Sent: Monday, March 31, 2003 3:42 AM
> To: 'Thompson Smith'; s-car-list at audifans.com
> Subject: RE: [s-cars] 314mmx30 brake calipers S6+ euro setup?
>
>
> Yes, you've found the S6+ setup...
> Those calipers you're asking about are the HP2 calipers, which showed
> up here on the neuS4 and A6/2.7tt and 4.2.
>
> I have no experience with HP2 brakes or their conversions (most
> popular is StopTech for the neuS4 crowd). I suspect there are fewer
> brake pad options compared to the 993tt BR calipers.
>
> From where you are, the easiest upgrade would be to get the RS2
> brackets to replace your ECS brackets and use the US-spec A8L rotor
> (323x30)...gives you
> an all-Audi solution, with all consumables readily available in
> the US (i.e.
> either an Audi dealer, Porsche dealer, or appropriate local parts
stores).
> The only "issue" with this setup is the classic, massive Audi rotor
with
> relatively minimal vent veins, but then you've got that today, so no
loss.
>
> --Linus
>
> --------------------------------------------------------
> Linus Toy Insanity is doing the same thing
> Mercer Island, WA you've always done and expecting
> linust at mindspring.com different results
> - Roger Milliken, Milliken & Co
> --------------------------------------------------------
>
> > -----Original Message-----
> > From: s-car-list-admin at audifans.com
> > [mailto:s-car-list-admin at audifans.com] On Behalf Of Thompson Smith
> > Sent: Sunday, March 30, 2003 6:28 PM
> > To: s-car-list at audifans.com
> > Subject: [s-cars] 314mmx30 brake calipers S6+ euro setup?
> >
> >
> >
> >
> > I was surfing up elcats FA tonight and came across these big brakes
> > >>
> >
> > 4A0 615 107 Floating caliper L
> > 4A0 615 108 Floating caliper R
> > 441 615 301 AA Brake disc 314x30
> > 4A0 698 151 B Pads - Girling
> >
> > Is this the S6+ setup? It says for AAN, AEC (V8) engine. The
> > illustration of the caliper with the Audi rings on it made me get
> > all giddy. Are these available? I have the 993tt red calipers (and
> > maybe these discs ECS stage II) on my S4. BTDT, Ideas you guys for
> > this OE Audi upgrade or stick with local hop ups?
> >
> > Thompson
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list
More information about the S-car-list
mailing list