[s-cars] Pad Sensor Purgatory

[Joseph Pizzimenti]

Eh, I wouldn't go with wire nuts if you drive like me.
 Vibrations might knock it loose, triggering the light
again.  I like overzealous use of electrical tape, but
as always, YMMV

Joe
--- CLAG500 at aol.com wrote:
> Rob,
>
>   Bring some beer over and we'll try Joey's fix. I
> think he's right about
> cutting the wire past the plug. When we spliced it
> together it was after the
> plug. I think the plug itself may be causing the
> problem. I'll bet if you cut
> the plug off and wire nut the ends together it will
> probably be fine.
>
> Chad
>
> In a message dated 5/5/03 4:03:04 PM Central
> Daylight Time,
> rfeagleye at thornhillcpa.com writes:
>
> > oe,
> >
> >  Can this be done with light beer? Also, can I
> have one before removing the
> >  wheel lug bolts? :)
> >
> >  Serious question, so I can cut it way up by the
> top of the fender no
> >  problem? I think the issue is actually in the
> wire from under the hood to
> >  the sensor plug, and I wanted to cut it off at
> the top, but I bet those
> damn
> >  wires are expensive and if I goofed, it would
> cost me.
> >
> >  Rob
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list


=====
-------------------------------------
The following statement is false.
The preceding statement is true.
-------------------------------------

__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com