No subject
Thu Nov 20 11:46:45 EST 2003
"You also need a centering plate to adapt the RS2 rear rotor(299x24mm)to
the different bolt-circle of the URS4/6(5x112mm versus 5x130mm on the
Porsche)."
It's different.
Steve
> -----Original Message-----
> From: s-car-list-admin at audifans.com
> [mailto:s-car-list-admin at audifans.com] On Behalf Of Park
> Sent: Friday, June 27, 2003 11:18 PM
> To: s-car-list at audifans.com
> Subject: [s-cars] RS2 Bolt Pattern? Spacer Use?
>
>
> This is a multi-part message in MIME format.
> --
> [ Picked text/plain from multipart/alternative ]
> Hi Guys,
>
> If anything is more painful than picking out a good looking
> set of wheels, let me know;)
>
> Came across this picture and was wondering if these wheels
> were Turbo Cups. The Turbo Cups off of a 964 Turbo 3.6 have
> the same design, only that have bolts. The car in the
> enclosed link seems to have Turbo Cup wheels only without
> bolts, a la Fikse.
>
> I was also wondering if the RS2 came with a 5x130 bolt
> pattern, or if it uses spacer/adapter.
>
> The link: http://20v.org/rs2side.jpg
>
> Thanks,
> Paul
> --
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/> s-car-list
>
More information about the S-CAR-List
mailing list