[s-cars] Nakamichi Installation

[Djdawson2 at aol.com]

--
[ Picked text/plain from multipart/alternative ]
Jim,
You only need a few connections:  12 volt constant, 12 volt switched, and
ground.  If you are using external amp(s), you'll be running RCA cables and
speaker wiring, if not, you'll have to run just speaker wiring.  However, every
electrical connection you need is right there... easily located with a test
light.  Speaker and signal cabling (if you use an ext amp) you'll have to run on
your own.  You will also need an antenna adapter, as the Audi plugs are not
compatible with any head unit I've seen, including the Nak.
HTH,
Dave in CO w/Nak head unit