[s-cars] ID this connector

[Mark Strangways]

This is a multi-part message in MIME format.
--
[ Picked text/plain from multipart/alternative ]
RE: [s-cars] ID this connectorHow sneaky Bob...
I use a needle to remove the lock portion, but end up stabbed alot :)
  ----- Original Message -----
  From: Robert Pastore
  To: 'Tom Green' ; s-car-list at audifans.com ; strangconst at rogers.com
  Cc: Robert Pastore ; james.murray at ericsson.com
  Sent: Saturday, October 04, 2003 8:42 PM
  Subject: RE: [s-cars] ID this connector


  Ok Tom, you goaded me into actually helping KC!
  The connector on the CPS side is not repalceable ( but this isn't the hal=
f that is the problem)

  The connector is in ETKA A6Q MG-9/SG-71/Illustration 971-52
  It is partnumber 443 906 233.
  The rubber boot for it is 443 906 102G.

  The difficult part is to find the proper contact pin removal tool.  It is=
 a Tyco/Amp part, but I do not find it in ETKA.  An easy way to remove the =
pins from a broken connector is to use a hot blade attachment on a solder i=
ron and cut apart the old connector.

  Bob



  -----Original Message-----
  From: Tom Green [mailto:trgreen at comcast.net]
  Sent: Saturday, October 04, 2003 7:42 PM
  To: s-car-list at audifans.com; strangconst at rogers.com
  Cc: rpastore at animalfeeds.com; james.murray at ericsson.com
  Subject: Re: [s-cars] ID this connector



  > From: James Murray :
  >
  > Looks like the connector for the Cam Positioning Sensor otherwise
  > known as the Hall Sensor... better get it fixed otherswise no vroom
  > vroom !!!
  >
  > From: K.C. Madsen:

  > So, with pictures, I ask, "What is this connector?"

  > From: Mark Strangways

  > The CPS is at the back of the head as far as I read in the Bentley.

  > From: Robert Pastore

  > On an AAN, the CPS is bolted to the front of the head, behind the cam
  > pulley. Inside the back of the pulley  there is a stamped steel ring
  > with a
  > window in it which pases through the CPS to generate the hall signal.

  The Godfather speaks and  all is silent.  Well, Mark is still mumbling
  in the background, it's not my fault, It's Bentleys fault.   Another
  hard lesson learned.  Never argue with the Archive Hoar.
  This still leaves Kenneth wondering, where do I get the connector
  without buying the sensor, and how do I get the other half ?  Has
  anyone found a dealer willing to supply connectors since there are
  several crumbling connectors on many listers cars ??

  Tom '95 S6
--