[s-cars] welcome to my nitemare

[Mark Strangways]

Just did my timing belt on the 93' CAD S4.
Part of the procedure was to replace this pulley and the cranks seal while
we where in there.
The parts aren't that much, at not compared to the cost of head work, for
the car that is !!!

Mark S
----- Original Message -----
From: "Bjørn Ødegård" <beernuts at online.no>
To: "* S List" <s-car-list at audifans.com>
Sent: Tuesday, October 07, 2003 1:53 AM
Subject: Re: [s-cars] welcome to my nitemare


Or just glued the pulley back on, since the woodruff key was missing? My
pulley was about 5deg. off due to this condition, and i thank the gods
(anyone..) that the pulley hadn't moved ! Well, even if it was glued on,
it was a piece of cake removing it, and thanks to Joern, (Thanks
again!!) I got a new toothed pulley so I could replace it while I was in
there. It should really be on the partslist for the job, because the key
is pretty brittle and will be worn or shot on most cars.

Bjorn :o)
'92 S4

----- Original Message -----
From: "Russ Panneton" <russ at s-cars.org>
To: <MILAMBERB at aol.com>
Cc: "* S List" <s-car-list at audifans.com>
Sent: Saturday, October 04, 2003 8:31 PM
Subject: Re: [s-cars] welcome to my nitemare


> I wonder if whoever replaced the timing belt last used the crank
locking
> tool when they R&R-ed the crank pulley bolt...
>
> Russ
> 95.5 S6
>
> MILAMBERB at aol.com wrote:
>
> >Had a major problem this week. I was following a sh*tty driver doing
about 20
> >in a 45. They pulled of and I got on it through 2nd and 3rd. All of a
sudden
> >the car bucks and the check engine light. Five seconds later all the
lights
> >come on and the car shuts off at speed. Luckily I was able to coast
to the
> >firehouse were I am a member (GLVFC). Let the car sit then come out
to start it.
> >Wissss. Hum it sounds like the starter is free spinning. Timing belt
is on and
> >tight (only has 20k on it) so what is the problem.........the crank
pully spun
> >on the shaft. What a nitemare. I'm thinking between 2-8 bent valves.
The funny
> >thing is was that I ran the codes only 4411 injector #1 came up. So
glad I
> >already sold my beater cars and left myself with only the ZX7R.
> >
> >            Pat Brady
> >        95 S6 RS2 broken
> >        03 ZX7R cold but very fast
> >_______________________________________________
> >S-CAR-List mailing list
> >S-CAR-List at audifans.com
> >http://www.audifans.com/mailman/listinfo/s-car-list
> >
> >
> >
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>
>



DISCLAIMER:
This message contains information that may be privileged or confidential and
is the property of the Roxar Group. It is intended only for the person to
whom it is addressed. If you are not the intended recipient, you are not
authorised to read, print, retain, copy, disseminate, distribute, or use
this message or any part thereof. If you receive this message in error,
please notify the sender immediately and delete all copies of this message.
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list