[s-cars] How much are the RS2 manifolds going for now?

Mihnea Cotet mihnea.cotet at easynet.be
Tue Apr 6 11:47:48 EDT 2004


It should be feasible guys, these manifolds are cast iron+nickel, and by 
heating them thorougly in an oven and welding with a nickel rod should work 
just fine, provided the cracks don't go from one side to another of the EM.

HTH,

mihnea

At 11:23 6/04/2004 -0400, Igor Kessel wrote:

>George Grubr wrote:
>
>>this crack I have on all three but I also have cracks between each cylinder
>>piping, in the narrow part as well - you can see through it. I think I send
>>pictures of to Igor long time ago when we thought about welding it but there
>>is no way.
>
>Yes, indeed, George and I had thought of welding the cast iron for a 
>while, but in the end decided that it was not feasible.
>
>--
>Igor Kessel
>two turbo quattros in the stable,
>the third one is in the works
>_______________________________________________
>S-CAR-List mailing list
>S-CAR-List at audifans.com
>http://www.audifans.com/mailman/listinfo/s-car-list



More information about the S-CAR-List mailing list