[s-cars] How much are the RS2 manifolds going for now?

[George Grubr]

mihnea, I have them in Czech - you can take them next time you wander to
this end - cracks are through from one end to another .....  

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Mihnea Cotet
Sent: Tuesday, April 06, 2004 17:48
To: Igor Kessel; g.grubr at connectel-cz.com
Cc: s-car-list at audifans.com
Subject: Re: [s-cars] How much are the RS2 manifolds going for now?

It should be feasible guys, these manifolds are cast iron+nickel, and by
heating them thorougly in an oven and welding with a nickel rod should work
just fine, provided the cracks don't go from one side to another of the EM.

HTH,

mihnea

At 11:23 6/04/2004 -0400, Igor Kessel wrote:

>George Grubr wrote:
>
>>this crack I have on all three but I also have cracks between each 
>>cylinder piping, in the narrow part as well - you can see through it. 
>>I think I send pictures of to Igor long time ago when we thought about 
>>welding it but there is no way.
>
>Yes, indeed, George and I had thought of welding the cast iron for a 
>while, but in the end decided that it was not feasible.
>
>--
>Igor Kessel
>two turbo quattros in the stable,
>the third one is in the works
>_______________________________________________
>S-CAR-List mailing list
>S-CAR-List at audifans.com
>http://www.audifans.com/mailman/listinfo/s-car-list

_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list