[s-cars] How much are the RS2 manifolds going for now?

[Mihnea Cotet]

In this case it's boat anchor time for them George :-)))))

At 17:52 6/04/2004 +0200, George Grubr wrote:

>mihnea, I have them in Czech - you can take them next time you wander to
>this end - cracks are through from one end to another .....
>
>-----Original Message-----
>From: s-car-list-bounces at audifans.com
>[mailto:s-car-list-bounces at audifans.com] On Behalf Of Mihnea Cotet
>Sent: Tuesday, April 06, 2004 17:48
>To: Igor Kessel; g.grubr at connectel-cz.com
>Cc: s-car-list at audifans.com
>Subject: Re: [s-cars] How much are the RS2 manifolds going for now?
>
>It should be feasible guys, these manifolds are cast iron+nickel, and by
>heating them thorougly in an oven and welding with a nickel rod should work
>just fine, provided the cracks don't go from one side to another of the EM.
>
>HTH,
>
>mihnea
>
>At 11:23 6/04/2004 -0400, Igor Kessel wrote:
>
> >George Grubr wrote:
> >
> >>this crack I have on all three but I also have cracks between each
> >>cylinder piping, in the narrow part as well - you can see through it.
> >>I think I send pictures of to Igor long time ago when we thought about
> >>welding it but there is no way.
> >
> >Yes, indeed, George and I had thought of welding the cast iron for a
> >while, but in the end decided that it was not feasible.
> >
> >--
> >Igor Kessel
> >two turbo quattros in the stable,
> >the third one is in the works
> >_______________________________________________
> >S-CAR-List mailing list
> >S-CAR-List at audifans.com
> >http://www.audifans.com/mailman/listinfo/s-car-list
>
>_______________________________________________
>S-CAR-List mailing list
>S-CAR-List at audifans.com
>http://www.audifans.com/mailman/listinfo/s-car-list