[s-cars] RS-2 group buy

[Russ Panneton]

FvAMI at aol.com wrote:

>Again ... where is that extra 1 mm lift coming from on a stock AAN Cam ... 
>you can grind them down ... but you can't add that 1 mm lift ... unless there is 
>something I am missing ... the RS2 cam has a least an additional mm at the 
>top of the CAM lobe over a stock AAN Cam.
>
>I don't see how this is possible to get this back ... an RS2 profile without 
>the 1 mm lift may be possible ... but not sure what this is buying you.
>
>
>  
>
You can grind down the cam's base circle so it is 1mm or more smaller in 
radius than it was originally.  Then the difference between the new base 
circle and the original lobe peak is 1mm more.  The question is will the 
lifters be able to absorb that extra 1mm of "slop" that they will see 
due to the smaller base circle.

Russ