[s-cars] Improved Lower RSB Brackets

[Djdawson2 at aol.com]

In a message dated 8/25/2004 9:46:34 PM Mountain Daylight Time, 
CaptMagu at aol.com writes:

> John's Improved Lower RSB Brackets(ILRBs) will not allow someone without a 
> stock sway bar to mount an HRSB.

Actually, it can work... if you drill and tap for the OEM style bolt.

> Dave Dawson had come up with a more permanent fix which was basically a 
> beefed up bracket of thicker material. I have a set but have not mounted them. 
> Dave has recently announced his retirement from ILRB production.


If anyone has leads on a Denver machine shop willing to produce said part, 
I'll be happy to investigate.  I just can't find someone to make them, and 
producing sets by hand is extremely time intensive.


 If the bracket does fail you do lose the use of the rear bar but > there is 
> no catastrophic issue.

Catastrophic... no.  But you will, without question, ruin the outer CV boot 
on the side of the failure... with all of the pleasant accompanying mess.  BTDT 
several times.
> 
> 
HTH,
Dave