[s-cars] Improved Lower RSB Brackets

[Michael Wakefield]

There's an interesting service now available on the net. You design a 
part using their software, and they will build it. I have no experience 
with them, but it sound interesting. It may also be expensive, but 
maybe worth a try. See emachineshop.com
Mike Wakefield
93S4
97Cabriolet
Highlands Ranch CO

On Aug 25, 2004, at 10:01 PM, Djdawson2 at aol.com wrote:

> In a message dated 8/25/2004 9:46:34 PM Mountain Daylight Time,
> CaptMagu at aol.com writes:
>
>> John's Improved Lower RSB Brackets(ILRBs) will not allow someone 
>> without a
>> stock sway bar to mount an HRSB.
>
> Actually, it can work... if you drill and tap for the OEM style bolt.
>
>> Dave Dawson had come up with a more permanent fix which was basically 
>> a
>> beefed up bracket of thicker material. I have a set but have not 
>> mounted them.
>> Dave has recently announced his retirement from ILRB production.
>
>
> If anyone has leads on a Denver machine shop willing to produce said 
> part,
> I'll be happy to investigate.  I just can't find someone to make them, 
> and
> producing sets by hand is extremely time intensive.
>
>
>  If the bracket does fail you do lose the use of the rear bar but > 
> there is
>> no catastrophic issue.
>
> Catastrophic... no.  But you will, without question, ruin the outer CV 
> boot
> on the side of the failure... with all of the pleasant accompanying 
> mess.  BTDT
> several times.
>>
>>
> HTH,
> Dave
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>