[s-cars] Re: S6/2.2T fuel line question - help needed

[Bob Rossato]

Sean - You must have an older version of ETKA and the "part number unknown"
you came across is for Item number 26 on the illustration, which is the old
separate feed line.  The part number for that was 034 133 725 J.  Starting
with the '95 S6 the feed line was permanently attached to the fuel rail, so
depending on which version of ETKA you have it will show a separate item
number, #26, for the feed line but won't give you a number.  If you look
under the '92-'94 100Q section for the S4 fuel lines you'll see the separate
part numbers.  The newer versions of ETKA now show item # 15 for both the
feed line and the fuel rail indicating they are all one piece, even though
the drawing still shows two, which is why it is so expensive.  The old
separate feed line was ~$100 item.

The part number for the new fuel rail with integrated feed line is 034 133
681 R.  The old two piece set up is NLA.

Rich - As Sean and others have mentioned, bring the whole fuel rail and feed
line to a hydraulic hose distributor and they should be able to easily
remove the old crimp and put on a new one.  I'd be surprised if it costs you
more than $25.

Bob



> -----Original Message-----
> From: s-car-list-bounces at audifans.com
> [mailto:s-car-list-bounces at audifans.com]On Behalf Of Sean Douglas


> I checked ETKA and the dealer may be right, the supply line
> connects to the
> fuel rail and looks like one piece. Its part number 15 on ill 133-73 and
> says "part number unknown" which generally means its unavailable.
> The return
> line is listed as 034 133 715 AJ.
>
> I suggest getting one fabricated by a hose shop or look for a used one.
>
> Sean