[s-cars] FMIC Alternatives - ROT thoughts

[Joseph Pizzimenti]

Bruce's setup was an Aquamist2 or 3 or something,
spraying about 6" from the throttle body into the
stream.

--- Theodore Chen <tedebearp at yahoo.com> wrote:
> 
> --- Bruce Mendel <Brucem105 at comcast.net> wrote:
> > For a less expensive and intrusive alternative,
> check out water injection.
> > No pressure loss like an intercooler, and if sized
> properly, dramatically
> > reduces intake temps. Very little plumbing, easily
> removable, and costs
> > around $650.
> > 
> > I ran the Aquamist system on my '93 S$ full RS2 +
> Stromung at many track
> > events, and the difference with and without water
> injection running was
> > dramatic. If the washer fluid reservoir ran dry
> mid-session, the car would
> > revert to its heat soaked self, noticeably slower
> (1.5-2 seconds per lap at
> > Watkins Glen) and less eager to go fast.
> 
> i forgot - was your water injection system spraying
> the water into the
> intake air stream, or onto the intercooler?
> 
> -teddy
> 
> 
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail SpamGuard - Read only the mail you want.
> http://antispam.yahoo.com/tools
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list


=====
-------------------------------------
The following statement is false.
The preceding statement is true.
-------------------------------------

__________________________________
Do you Yahoo!?
Yahoo! Mail SpamGuard - Read only the mail you want.
http://antispam.yahoo.com/tools