[s-cars] New Oil Temp Sender - Oil Temp Gauge Still Erratic

[Igor Kessel]

Mark Pollan wrote:
> I sometimes need to tap my Oil Temp Gauge to get it to respond.  Sometimes
> it will hold the temp and sometimes not.  What are possible/probable causes
> if anybody can help me out.
> 
> The patient is a 95.5 S6.
> 
> Regards,
> 

Mark,
remove the cluster, unscrewq the two little nuts, remove the gauge and 
lightly sand the contact pads on the PCB with either a pencil eraser or 
very fine grit sandpaper.

-- 
Igor Kessel
two turbo quattros